ACRYFREE

  • Units in Stock: 1000


Call for Price


Click here to send an email to ask a question about this product

PERFLEX ACRYFREE

MONOMER-FREE ACRYLIC RESIN

NON-ALLERGENIC ACRYLIC

PERFLEX ACRYFREE IS AN EXCLUSIVE ELASTIC THERMOPLASTIC ACRYLIC WITH HIGH IMPACT RESISTANCE for full and partial dentures by injection molding system.

Perflex Acryfree is 10 times more resistant against breakage than conventional acrylics, light weight, translucent, and natural. 

Designed to high level of aesthetic results, hypoallergenic, and biocompatible, providing life-like dental appliances that virtually disappear inside the mouth, since Acryfree is injected into the flask, the final result is a very precise restoration, more retentive and more comfortable for the patient.

Perflex Acryfree can be produced much thinner than conventional acrylic restorations due to the strength of the new composition of the material. 
 

Acryfree

  • can be repaired and relined with all acrylics; hard/soft, cold/hot, or by the same material itself by injection. 
  • the excellent polish and the unique luster of the denture surface allow to prevent calculus and bacteria accumulation. 

Moreover, patients who are sensitive to monomer composition used in conventional acrylic dentures can now choose ACRYFREE for their dentures, also suitable for implant retained over-dentures. Acryfree can be used in combination with porecelain artificial teeth for a complete non-allergenic denture or appliance. 

No more bulky heavy dentures! Acryfree is the new aesthetic and perfect solution for total and partial dentures of today;s dentistry.

**NEW EXTRA LARGE CARTRIDES FOR BIG SIZE FULL DENTURES CASES.

Perflex Acry Free is sold in a variety of color shades: Standard Pink, Light Pink, Purple Pink.

Package: Box of 6 cartridges pre-dried, sealed and protected with plastic cap against moisture.

Sizes 25 diam and 28 diam: Medium, Large and EXTRA LARGE

Patient care instructions is provided with the denture for the patients.

*Perflex Acry Free is sold in bulks of 200gr. and 1kg.

Empty aluminum cartridges are sold separately.

MSDS INFORMATION

Instructions for Hydraulic & Manual Presses & Portable Furnaces

All of us at Perflex want you to be highly successful with our materials. You will be successful with our materials if you closely follow these instructions. These instructions are for Biosens and Acryfree. These instructions can be used with either a Manual or a Hydraulic injector:

  1. After boilout, paint the separator on the models while they are hot.
  2. Wait for the flask to dry.
  3. Drill diatoric holes in teeth.
  4. Cement teeth back into the mold.
  5. By then, flasks should be cool. To heat flasks to correct temperature place open flasks (two halves) in preheated toaster oven for 17-19 minutes depending on material chosen at 160°F to 190°F. *****At the same timeplace tube in furnace.*****
  6. For Biosens, set furnace temperature at 590°F .....18 minute heat time.
  7. For Acryfree, set furnace temperature to 538°F ....20 minute heat time.
  8. Take flasks out of toaster oven after 17 minutes for Biosens, and 19 minutes for Acryfree.
  9. Bolt the two halves together
  10. You have one minute to inject!
  11. After injection, wait 2 minutes.
  12. Remove flasks from press.
  13. Let bench cool for 30 minutes before opening. 



wabusiness template